Henan TATU Highway
Hand-push Airless Cold Paint Road Marking Machine TT-ST200-I-A/B/C
1. Engine: Japanese Robin 6.0HP four-stroke air-cooled gasoline engine.
2. Chassis: A firm welded frame; its surface has been chrome-plated or sprayed with corrosion resistant coating; equipped with imported high-speed bearing which ensures the whole machine lighter and more convenient.
3. Rubber wheel: The left and right back wheels are gas-filled pressure resistant vacuum wheels whose diameters are Ф350mm; the front directional wheel is special naturally modified rubber wheel with abrasion resistance whose diameter is Ф190mm.
4. Front wheel directional device: It can lock the front wheel to ensure the road-marking machine to operate freely in straight line or turning.
5. Guide rod: The adjusted guide rod can be freely adjusted to up, down, left and right.
6. Paint pump: Equipped with single new-type hydraulic plunger type high pressure airless pump that runs stably with big flow and stable pressure. The Maximum pressure is 20mpa (working pressure 10-15mpa) with maximum flow 12.5L/min.
7. Paint tank (optional): The capacity is 80Kg; equipped with a filter device in it and air in-take filter in the feeding port.
8. Spray gun: Equipped with double new-type manual spray guns with hard side columnar reverse washed nozzles (20/25 or 30/25) which can make the on-spot discharging easy and convenient; The non-arc nozzle ensures the line straight and exact. The hand brake controller makes the change among single or double spray guns flexibly.
9. Spray width: 100-450mm.
10.Size & Weight :1500 mm(L)x 720 mm(W)x 1040 mm(H)x 121kg (excluding the paint tank).
Option for TT-XT-II Roll Booster for operator to realize automatic function.
Type B equipped with air-compressor, glass beads pressurized bin, glass beads spray gun, and glass beads spray control system and stainless steel spray system to meet the needs of water paint construction.
Except all the functions of type B, type C is equipped with a micro-electronic control system, which consists of micro-electronic controller, on-off coder, electromagnet, special gun bracket and so on. This system can set four kinds of marking modes according to the national road marking standard, and realize fully automatic control
2. Chassis: A firm welded frame; its surface has been chrome-plated or sprayed with corrosion resistant coating; equipped with imported high-speed bearing which ensures the whole machine lighter and more convenient.
3. Rubber wheel: The left and right back wheels are gas-filled pressure resistant vacuum wheels whose diameters are Ф350mm; the front directional wheel is special naturally modified rubber wheel with abrasion resistance whose diameter is Ф190mm.
4. Front wheel directional device: It can lock the front wheel to ensure the road-marking machine to operate freely in straight line or turning.
5. Guide rod: The adjusted guide rod can be freely adjusted to up, down, left and right.
6. Paint pump: Equipped with single new-type hydraulic plunger type high pressure airless pump that runs stably with big flow and stable pressure. The Maximum pressure is 20mpa (working pressure 10-15mpa) with maximum flow 12.5L/min.
7. Paint tank (optional): The capacity is 80Kg; equipped with a filter device in it and air in-take filter in the feeding port.
8. Spray gun: Equipped with double new-type manual spray guns with hard side columnar reverse washed nozzles (20/25 or 30/25) which can make the on-spot discharging easy and convenient; The non-arc nozzle ensures the line straight and exact. The hand brake controller makes the change among single or double spray guns flexibly.
9. Spray width: 100-450mm.
10.Size & Weight :1500 mm(L)x 720 mm(W)x 1040 mm(H)x 121kg (excluding the paint tank).
Option for TT-XT-II Roll Booster for operator to realize automatic function.
Type B equipped with air-compressor, glass beads pressurized bin, glass beads spray gun, and glass beads spray control system and stainless steel spray system to meet the needs of water paint construction.
Except all the functions of type B, type C is equipped with a micro-electronic control system, which consists of micro-electronic controller, on-off coder, electromagnet, special gun bracket and so on. This system can set four kinds of marking modes according to the national road marking standard, and realize fully automatic control
Products :
Machine Tools (1)