Henan TATU Highway
Hand-push Airless Cold Paint Road Marking Machine TT-ST200-II-A/B/C
1. Engine: Japanese Robin 6.0HP or Honda 5.5HP four-stroke air-cooled gasoline engine.
2. Chassis: A firm welded frame; its surface has been chrome-plated or sprayed with corrosion resistant coating; equipped with imported high-speed bearing which ensures the whole machine lighter and more convenient.
3. Rubber wheel: The left and right back wheels are gas-filled pressure resistant vacuum wheels whose diameters are Ф350mm; the front directional wheel is special naturally modified rubber wheel with abrasion resistance whose diameter is Ф190mm.
4. Front wheel directional device: It can lock the front wheel to ensure the road-marking machine to operate freely in straight line or turning.
5. Guide rod: The adjustable guide rod can be freely adjusted to up, down, left and right.
6. Lighting and warning function: Equipped with highlight lights which makes the night working convenient. The warning lights whose flicker frequency can be freely adjusted greatly improve the safety of the marking work.
7. Paint pump: The new-type diaphragm type high pressure airless pump with big flow and stable pressure. Maximum pressure is 20mpa (working pressure is 10-15 mpa) with maximum flow 8.5 L/min.
8. Paint tank: The capacity is 65L with a filter device in it and air in-take filter in the feeding port.
9. Spray gun: Equipped with double new-type hand spray guns with hard side columnar reverse washed nozzle (17/25) which can makes the on-spot discharging easy and convenient; the non-arc nozzle can enable the marking line straight and exact. The 6m lengthening pipe which is installed with the machine can be used for spraying special signs like arrows and letters.
10. Spray width: 100-450mm.
11. Glass beads dispenser: The glass beads spraying system can realize the reflective effects of the marking when spraying paint.
12. Glass beads bin: The glass beads bin with a window to check the quantity of glass beads timely. The capacity is 25kg.
13. Size (excluding the roll booster) & Weight: 1620mm (L) ×1260mm (W) ×1200mm (H). 180kg.
Option for TT-ZT-II Roll Booster for operator to realize automatic function.
Type B is stainless steel spraying system that applies to water based paint.
Except all the functions of type B, type C is equipped with a micro-electronic control system, which consists of micro-electronic controller, on-off coder, electromagnet, special gun bracket and so on. This system can set four kinds of marking modes according to the national road marking standard, and realize fully automatic control
2. Chassis: A firm welded frame; its surface has been chrome-plated or sprayed with corrosion resistant coating; equipped with imported high-speed bearing which ensures the whole machine lighter and more convenient.
3. Rubber wheel: The left and right back wheels are gas-filled pressure resistant vacuum wheels whose diameters are Ф350mm; the front directional wheel is special naturally modified rubber wheel with abrasion resistance whose diameter is Ф190mm.
4. Front wheel directional device: It can lock the front wheel to ensure the road-marking machine to operate freely in straight line or turning.
5. Guide rod: The adjustable guide rod can be freely adjusted to up, down, left and right.
6. Lighting and warning function: Equipped with highlight lights which makes the night working convenient. The warning lights whose flicker frequency can be freely adjusted greatly improve the safety of the marking work.
7. Paint pump: The new-type diaphragm type high pressure airless pump with big flow and stable pressure. Maximum pressure is 20mpa (working pressure is 10-15 mpa) with maximum flow 8.5 L/min.
8. Paint tank: The capacity is 65L with a filter device in it and air in-take filter in the feeding port.
9. Spray gun: Equipped with double new-type hand spray guns with hard side columnar reverse washed nozzle (17/25) which can makes the on-spot discharging easy and convenient; the non-arc nozzle can enable the marking line straight and exact. The 6m lengthening pipe which is installed with the machine can be used for spraying special signs like arrows and letters.
10. Spray width: 100-450mm.
11. Glass beads dispenser: The glass beads spraying system can realize the reflective effects of the marking when spraying paint.
12. Glass beads bin: The glass beads bin with a window to check the quantity of glass beads timely. The capacity is 25kg.
13. Size (excluding the roll booster) & Weight: 1620mm (L) ×1260mm (W) ×1200mm (H). 180kg.
Option for TT-ZT-II Roll Booster for operator to realize automatic function.
Type B is stainless steel spraying system that applies to water based paint.
Except all the functions of type B, type C is equipped with a micro-electronic control system, which consists of micro-electronic controller, on-off coder, electromagnet, special gun bracket and so on. This system can set four kinds of marking modes according to the national road marking standard, and realize fully automatic control
Products :
Machine Tools (1)